Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
8) Use the buttons UP, DN and ENTER to enter
the values desired for the hour (
minute (
Min:
or
–
) and the number of repeats
M:1
6
(
–
Rep : 01
00 = repeated continuously) . The display will
then show a "summary" of the values entered,
for example:
CH:03 01
16:10 21
(program location 3, replayed once,
start time 16:10 h, message M1)
Note: The numbers 01 – 20 indicate the messages
Voice01 – 20; the numbers 21 – 26 indicate the mes-
sages M1 – M6 .
If required, create further program items (
To exit the menu, press the button MENU .
6.5.2 Changing or deleting program data
To change or delete a day program item, proceed
as described in the previous chapter . In step 7,
select the program location to be changed and
then press the button ENTER to confirm . The dis-
play will show:
Program
Change
To enter new data for the program item, press the
button ENTER and proceed with step 8 .
To delete the program item, press the button UP
so that
Delete
then press the button ENTER . To exit the menu,
press the button MENU .
6.5.3 Copying a day schedule
To copy a programmed day schedule to another
weekday:
1) Press the button MENU (10) . The display will
show:
Mode Set
Time
2) Press the button UP (12) so that
appear on the lower display line .
3) Press the button ENTER (6) . The display will
now show:
Choose
Week Set
4) Press the button UP so that
pear on the lower line of the display .
22
Hour:
), the message (
Voice:01
= replayed 1 to 9 times,
09
will appear on the lower line;
Program
Day Copy
5) Press the button ENTER . The display will now
), the
show, for example:
–
20
Original
Mon
6) Use the button UP or DN (11) to select the
weekday of the day schedule to be copied .
7) Press the button ENTER . The display will now
show, for example:
Copy Day
Mon
8) Use the button UP or DN to select the weekday
to which the day schedule is to be copied; then
press the button ENTER .
The schedule will be copied and the menu will
be exited . To copy further weekday schedules,
☞
step 7) .
start with step 1 .
6.6 Memory card
Using a microSD[HC] card
ternally created recordings can be copied to the
memory of the insertion module . The files must
have been saved in the format "mp3" and their
names must be identical to those of the target
storage locations to be used (e . g . "M6 .mp3" or
"Voice09 .mp3")
not exceed the capacity of the corresponding
storage location:
"M1" to "M6": up to 2176 kBytes each
"Voice01" to "Voice20": up to 128 kBytes each
Insert the card into the slot SD CARD (5), with
the contacts facing downwards . Slide the card
into the slot until it engages . To remove the card,
slightly push the card so that it disengages .
Due to the large number of storage device manufactur-
1
ers and device drivers, it cannot be guaranteed that all
memory cards are compatible with the PA-1120DMT .
If the file name contains the extension „ .mp3" twice,
2
the audio file will not be replayed . This will easily hap-
pen when the display of file extensions in Windows has
been deactivated and the file extensions are hidden .
Always make sure to activate the feature so that the
will
file extensions are shown .
Windows is a registered trademark of Microsoft Corporation in the
USA and other countries.
6.6.1 Replaying an audio file
An audio file on a memory card can be replayed by
will ap-
means of the menu . To allow for time-controlled
replay or for integration into a programmed mes-
(FAT16 / FAT32), ex-
1
. In addition, the file size must
2
Advertenties
Hoofdstukken
Inhoudsopgave
