Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Fig. 12: Battery compartment with a 36 V battery inserted
5.1.2 Attaching the hose
l WARNING!
Risk of electric shock
Risk of fire
If a non-electrically conductive hose is used, this can lead to
an electric shock and damage to the electronics in the vacuum
cleaner. This could cause a fire.
▶ Only use the original electrically conductive hose intended for
the cordless vacuum cleaner.
▶ Put the suitable hose onto the connection sleeve.
▶ Ensure a secure connection.
5.1.3 Attach the cordless control *
To operate in the >AUTO< mode, the cordless control must be
installed.
You can find more detailed information in the manufacturer's
documentation.
5.1.4 Inserting the disposal bag
Vacuuming without a disposal bag is only permitted for dusts with
a concentrations of > 1 mg/m
Only class M vacuum cleaners with a special container and
rotating slider in the suction opening are suitable for the use of
PE emptying and disposal bags.
▶ If necessary, remove the existing filter bag or empty the
container (seeKap. 5.5 „Removing the vacuumed material" on
page 31).
▶ Select a suitable filter bag for your application.
NOTE
3
.
NOTE
▶ To insert the bags, proceed as described in one of the following
sections:
Inserting a non-woven filter bag*
Use the non-woven filter bag only for dry vacuuming.
▶ Push the flange completely over the suction port.
▶ Turn the red rotating slider inside to CLOSE until it stops at
the ▲mark.
Inserting PE emptying and disposal bags*
Only class M and H vacuum cleaners with a special container
and rotating slider in the suction opening are suitable for
the use of PE emptying and disposal bags.
▶ Turn the red rotating slider inside to OPEN until it stops at the
▲mark.
▶ Push the flange completely over the suction port.
▶ Place the upper bag opening over the edge of the container.
NOTE
NOTE
en - 29
Advertenties
Inhoudsopgave
