Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB
■
Use only rubber-sheathed cables of quality
H05RN-F according to DIN 57282, Part 817 /
VDE 0282, Part 817 with a rubber-coated
plug connector and a conductor cross section
of at least 1.5 mm² (230 V: 3 x 1.5 mm²,
400 V: 5 x 1.5 mm²). The cable must not be
of a lighter type.
For the United Kingdom only: rubber-
sheathed cables of type BS 6500 (1984), Ta-
ble 16 PVC 3 core flex, 300/500 V HOS VV-F
with a rubber-coated plug connector and a
13 A fuse.
■
The maximum permissible cable length is
50 m. A longer cable impairs the motor power
and hence the performance and function of
the log splitter.
■
Mains cable, mains plug and coupling socket
must be undamaged. A defective mains ca-
ble (e.g. with cracks/fractures, cuts, crushed
or kinked points in the insulation) must not be
used.
■
Check the condition of your mains cable each
time prior to use.
■
Protect the mains cable from heat and sharp
edges. Do not expose plug connectors to
moisture.
■
Do not pull on the mains cable to remove the
mains plug from the socket.
■
If the mains cable is damaged, immediately
disconnect it from the mains.
■
Repairs to the mains cable, mains plug and
coupling socket may only to be carried out by
qualified electricians.
4 SAFETY INSTRUCTIONS
Operator:
■
Persons under the influence of alcohol, drugs
or medication are not allowed to use the ma-
chine.
Personal protective equipment:
■
Wear clothing and protective equipment in
accordance with the regulations in order to
avoid injuries to the eyes, as well as to avoid
hearing impairment.
■
The clothing must be appropriate (tightly fit-
ting) and must not restrict movements. If you
have long hair, it is essential to wear a hair
net. The personal protective equipment com-
prises:
■
Ear protection
■
Protective glasses
18
■
Work gloves
■
Safety shoes
■
Long trousers
Working area:
■
No further persons, children or animals may
be in the working area of the shredder.
■
Keep the working area free from material to
be shredded and other objects – danger of
stumbling.
■
The user of the machine is responsible for
accidents involving other persons or their
property.
■
Ensure good lighting of the working area.
Operating times:
■
When operating in residential areas, observe
country-specific and communally permitted
operating times according to the regulations
on noise pollution.
■
Work with the machine in daylight or with
good lighting only.
Operation:
■
Do not reach into the hopper or feed chute
during operation!
■
The cutting disk after-runs after the machine
is switched off!
■
Only put the machine into operation when as-
sembly has been completed.
■
Always perform a visible inspection prior to
using the machine. The machine must be in a
safe operating condition.
■
Never work alone.
■
Immediately renew damaged or worn parts.
■
Only use the machine if it is in the technical
condition stipulated by the manufacturer.
■
Do not undertake shredding work in the rain,
snow, stormy weather or during thunder-
storms (danger of lightning!). Do not use the
shredder in wet or damp surroundings.
■
Do not deactivate safety and/or protective de-
vices on the machine.
■
Always ensure that the machine is stable be-
fore starting work.
■
Never transport the shredder with the motor
running.
■
Never transport the shredder with open or
unlocked shredder upper section.
■
Switch the motor off, wait for the cutting disk
to stop moving, and disconnect the machine
TCS 2500 | TCS Duotec 2500 | TCS Duotec 3000
Safety instructions
Advertenties
Hoofdstukken
Inhoudsopgave
