Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB
Symbol
Meaning
Operating instructions
To avoid electric shock, do not
damage or cut the power cable!
2.2
Legends and signal words
DANGER! Denotes an imminently danger-
ous situation which will result in fatal or serious
injury if not avoided.
WARNING! Denotes a potentially danger-
ous situation which can result in fatal or serious
injury if not avoided.
CAUTION! Denotes a potentially dangerous
situation which can result in minor or moderate
injury if not avoided.
IMPORTANT! Denotes a situation which can
result in material damage if not avoided.
NOTE Special instructions for ease of un-
derstanding and handling.
3 PRODUCT DESCRIPTION
3.1
Designated use
The garden shredder is only intended for use in
shredding organic materials that are incurred in
the home and garden. No other use is permitted.
Only work with the trailer when it is fully assem-
bled.
This trailer is intended solely for use in non-com-
mercial applications. Any other use (as well as
unauthorised conversions or add-ons) are re-
garded as contrary to the intended use and will
result in exclusion of the warranty as well as loss
of conformity (CE mark); the manufacturer will
thus decline any responsibility for damage and/or
injury suffered by the user or third parties.
P40: continuous operation with interruptions
The appliance can be operated continuously but
with regular interruptions at high loads. If it is op-
erated for too long at high loads, the overload
protection switches the appliance off. The appli-
ance has been tested and approved for operation
at full load for 40 s followed by an idling time of
60 s.
16
3.2
Possible foreseeable misuse
■
The machine is not intended for commercial
use or in agriculture and forestry.
■
Do not use the machine in rainy weather.
■
The safety devices on the machine must not
be dismantled or bypassed.
3.3
Residual risks
Even during correct use of the appliance, there is
always a certain residual risk that cannot be ex-
cluded. Depending on the use, the following po-
tential risks can be derived from the type and
construction of the appliance:
■
Injuries from flying cuttings
■
Injuries due to inhaling cutting particles
■
Injuries due to reaching into the shredder
mechanism
■
Injuries due to the machine tipping over
3.4
Safety and protective devices
WARNING! Risk of injury. Defective and
disabled safety and protective devices can result
in serious injury.
■
Have any defective safety and protective de-
vices repaired.
■
Never disable safety and protective devices.
3.4.1
Safety circuit breaker
When the securing bolt (02/1) is pulled out, the
safety circuit breaker is tripped. As a result, the
motor can no longer be started by actuating the
on/off switch.
The shredder can only be started with by actuat-
ing the on/off switch again when the feed tube
has been fastened on the housing again using
the original securing bolt.
3.4.2
Switch with overload protection
According to the VDE regulations, the appliance
is equipped with a switch with an integrated safe-
ty switch that shuts off the current in the event of
overloading. Overloading can occur if the blade is
blocked for a long time.
For safety purposes, the safety switch is de-
signed so that you have to wait for around 1 - 3
minutes before the motor can be switched on
again. However, you must eliminate the cause of
the overloading beforehand.
First, the switch must always be switched off in
order to switch on the motor again. After the wait-
ing time, the appliance can be started again by
actuating the switch.
TCS 2500 | TCS Duotec 2500 | TCS Duotec 3000
Product description
Advertenties
Hoofdstukken
Inhoudsopgave
