Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
PROBLEM
An unusually large quantity of
sparks
Major wear in partial areas
Break saw blades
WARNING!
Do not use any additional devices or accessories that are not recommended by the manufacturer
for this tool. The use of non-recommended additional devices or accessories may result in severe
injuries.
The machine and all accessories and the packaging need to be disposed of in an environmentally
friendly manner and are not intended for domestic waste. Further information on recycling can be
obtained from the relevant environmental protection authorities in charge, your waste collection
company or where you purchased the product. This symbol on the product or on the packaging indicates
that this product (including the batteries) is not intended for domestic waste. It must be handed in at a point
of acceptance for the recycling of electric and electronic devices. By disposing of this product correctly, you
make an important contribution to environmental protection. The incorrect removal or use of this product
may have negative consequences for the environment and health. The recycling of materials prevents any
waste of valuable resources.
M31169_Dual Saw_CS450_Manual_20210906_CP.indd 30
M31169_Dual Saw_CS450_Manual_20210906_CP.indd 30
PROBLEM RECTIFICATION
CAUSE
1. Damaged teeth
2. The feeding speed is too low
3. Used teeth
1. The feeding speed is too high
2. Damaged teeth
3. Used teeth
4. Cuts do not run in parallel or
vertically to the working area
1. The feeding speed is too high
2. Damaged teeth
3. Used teeth
4. Saw blades were overheated
ACCESSORIES
DISPOSAL OF ELECTRIC DEVICES
30
SOLUTION
1. Replace saw blades
2. Increase feeding speed
3. Insert new set of saw blades
1. Reduce feeding speed
2. Replace saw blades
3. Hold saw parallel to work area
1. Reduce feeding speed
2. Replace saw blades
08.09.21 09:28
08.09.21 09:28
Advertenties
Inhoudsopgave
