Advertenties
Beschikbare talen
Beschikbare talen
13.6 Assembling the accessories
The device can be operated with glass turntable or with glass turntable and metal rack.
13.6.1 Glass turntable
Assemble the glass turntable as follows:
Insert the glass turntable so the groove on the underneath side of the glass turntable
catch in the drive shaft.
When operating the grill, the metal rack can also be used in order to grill the food evenly
as a result of the rotation.
13.6.2 Metal rack
Insert the metal rack onto the glass turntable.
13.7 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following
instructions must be observed for the electrical connection:
Before connecting the device, compare the connection data (voltage and frequency)
on the rating plate with those of your electrical network. This data must agree in order
that no damages occur in the device. If in doubt, ask your qualified electrician.
The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs
or gangs is prohibited because of the danger of fire that is involved with this.
Make sure that the power cable is undamaged and has not been installed under the
device or over hot or sharp surfaces.
The electrical outlet must be protected by a 16A safety cut-out switch, separately from
other electricity consumers.
The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. If in doubt, have the house installation
checked over by a qualified electrician. The manufacturer cannot be made responsible
for damages that are caused by a missing or damaged protective conductor.
14 Design and Function
This chapter provides you with important safety notices on the design and function of the
device.
Please note
Please note
Insert the rolling ring.
55
Advertenties
