Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6. Partially insert the oven into the opening and connect the oven to the hob. The
connectors at the end of the group of wires coming out of the hob should be
inserted into the appropriate sockets of the control panel of the oven according to
their colour, i.e. a black connector should be inserted into a socket marked with the
same colour.
7. Complete the installation of the appliance and fix the oven with 4 screws (fig. 2,
right side).
2.4 Electrical connection
Instructions for the installer (qualified professional)
The cooker is manufactured to work with three-phase alternating current
(400V3N~50Hz). Remember that the connection wire should match the
connection type and the power rating of the cooker. The connection cable must be
secured in a strain-relief clamp. The ground wire must be connected to the marked
clamp of the terminal. The electric supply of the appliance must be equipped with
an emergency switch with a distance between the contacts of at least 3 mm which
disconnects the entire appliance from the mains in a case of emergency. Read the
information on the rating label and the connection diagram before connecting the
appliance to the mains.
When the socket is not accessible for the user or a fixed electrical connection of
the appliance is required, an all-pole disconnecting device must be incorporated
during installation. Disconnecting devices are switches with a contact opening
distance of at least 3 mm. These include LS-switches, fuses and protectors (EN
30335).
33
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
