Application
Working on plaster/light building materials
Removing tiles
Working on brick
Working on concrete
Changing the chiselling position (Vario-Lock)
You can lock the chisel in 12 different positions, allowing
you to select the optimum working position for each task.
– Insert the chisel into the tool holder.
– Push the chisel adjustment ring (3) forwards and turn the
chisel to the required position with the chisel adjustment
ring (3).
– Release the chisel adjustment ring (3) and turn the chisel
until it audibly clicks into place.
Working Advice
Vibration damping
The integrated vibration damping
function reduces the generated vibra-
tion.
Do not continue to use the power tool if the damping
u
element is damaged.
Maintenance and Service
Maintenance and Cleaning
Pull the plug out of the socket before carrying out any
u
work on the power tool.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
Replace a damaged dust protection cap immediately.
u
It is recommended that you have use an after-sales
service for this.
Lubrication
The power tool is lubricated with grease and is ready for im-
mediate use.
The lubricating grease should only be changed during main-
tenance or commissioning carried out by an after-sales ser-
vice centre authorised to work with Bosch power tools. It is
crucial that only lubricating grease provided by Bosch is
used.
The lubricating grease must be changed every time the car-
bon brushes are replaced. The old lubricating grease must
be removed before new lubricating grease is applied.
Bosch Power Tools
Service indicator
Thumb-
wheel posi-
When the carbon brushes are worn out, the power tool
tion (7)
switches itself off. This is indicated approx. eight hours be-
forehand by the service indicator (8) lighting up or flicker-
ing.
The power tool must be sent to customer service for main-
tenance. For addresses, see: (see "After-Sales Service and
Application Service", page 13)
Stand by indicator
When the mains plug is plugged in and there is a mains
voltage, the stand by indicator (9) should light up.
If the power tool cannot be switched on when the stand by
indicator (9) is lit, it must be sent to the after-sales service.
For addresses, see: (see "After-Sales Service and Applica-
tion Service", page 13)
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Do not dispose of power tools along with
household waste.
Only for EU countries:
Power tools that are no longer suitable for use must be dis-
posed of separately. Use the designated collection systems.
If disposed incorrectly, waste electrical and electronic
equipment may have harmful effects on the environment and
human health, due to the potential presence of hazardous
substances.
English | 13
1 609 92A 9VB | (07.08.2024)