Advertenties
Beschikbare talen
Beschikbare talen
Fastscan:
FastScan is a provider based search with automatic update of the transmitter data.
1. Press the "MENU" button and use the p/q/t/u buttons to move to "Station".
2. Press the "OK" button and use the p/q buttons to navigate "Satellite configuration".
3. Confirm the entry with the "OK" key.
4. Use the p/q/t/u buttons to select a satellite.
5. Press the "OK" button to highlight teh satellite.
6. Presse the "BLUE" key to enter the search setting.
7. In "Search mode, select FastScan" and press the "OK" key.
8. Use the t/u buttons tp select a FastScan provider.
9. Then press the "OK" key to confirm the setting and start the search.
MAIN MENU – PICTURE SETTINGS
Picture menu:
Brightness: Adjusts the overall brightness of the picture.
Colour: Adjusts the colour.
Sharpness: Increase this value to see sharper edges in the picture. Decrease it to see softer edges.
Tint: Adjusts the hue (only in NTSC mode).
Colour Temp: Select from warm, cold and normal.
Noise suppression:
Select from the following settings: Low, Medium, High, Off.
SCREEN: This option is available only if a PC is connected via the VGA output.
Dynamic CR: Switch the dynamic contrast "On" or "Off".
Face colour: Change this setting from –50 to +50 to adjust the face colour.
Press the "MENU" button on your remote control to
return to the menu view.
Press the p/q/t/u buttons to navigate through the
menu and go to the menu item "Picture".
Confirm by pressing "OK".
Picture adjustment: Select from Standard,
Dynamic, Personal and Mild.
NOTE: Contrast, Brightness, Colour and Sharpness are
available only in the "Personal" option.
Contrast: Adjusts the difference between the brightest
and darkest areas of the picture.
65
ENGLISH
Advertenties
