Advertenties
Beschikbare talen
Beschikbare talen
Radio Bus System
System Information
This device is a product of the instabus
EIB system and complies with EIBA
directives. Detailed technical knowledge
obtained in instabus training courses is a
prerequisite to proper understanding.
The functionality of this device depends
upon the software. Detailed information
on loadable software and attainable
functionality as well as on the software
itself may be taken from the
manufacturer's product database.
Planning, installation and commissioning
of the unit are performed by means of
EIBA certified software.
14
GB
Function
The Radio Receiver can be used to integrate
Radio sensors intothe instabus EIB system.
Radio data telegrams received from
components learned in are converted into
corresponding EIB telegrams.
Data transfer is unidirectional.
The following radio-control products are
presently supported:
• Hand-held transmitter
(Comfort and Standard).
• Wall-mounted transmitter insert (single,
double, and quadruple).
• Universal transmitter.
• Radio detector 180.
Scope of Functions
General
• Unidirectional conversion of the
received radio telegrams into
corresponding instabus telegrams.
• Up to 50 channels with different
channel functions can be parameterised.
• A total of 100 memory locations for
keys (e. g. hand-held transmitter keys)
and devices (e. g. radio detector) are
available.
Channel function: Switching
The functions of the left/upper and the
right/lower keys can be parameterised.
Channel function: Toggling
• Alternate transmitting of ON and OFF
telegrams per key.
Channel function: Dimming
• Adjustable dimming step width.
• Telegram repetition and stop telegram
possible.
Channel function: Louver
• Key function (UP, DOWN) and time
between short-time and long-time
operation selectable.
• Adjustable blade adjustment time (time
in which a move command can be
stopped by releasing the key).
Channel function: Value transmitter
• The values (0...255) of the left/upper
and the right/lower keys can be
parameterised.
Channel function: Lightscape extension
• The lightscape numbers (1...8) of the
left/upper and the right/lower keys can
be parameterised
• Memory function possible.
Channel function: Lightscape
• Calling and storing of up to five
lightscapes with eight outputs each via
keys or extension.
• Switching (1 bit) or dimming value
(1 byte) object types can be
parameterised per output.
Channel function: Automatic switch
• Transmitting of 1-bit or 1-byte value
telegrams, in dependence upon the
preset dimming value.
• Telegram at the beginning and at the
end of a detection selectable.
• Transmit delay at the end of a
detection and locking time can be
parameterised.
Channel function: Universal
transmitter as switch
• Transmitting of ON and OFF telegrams
in accordance with the universal
transmitter telegrams received.
15
Advertenties
