Advertenties
Beschikbare talen
Beschikbare talen
Conventions in this manual
3
Conventions in this manual
3.1
General information on the installation manual
This installation manual contains the essential information and instructions for
installing the parking cooler. The information is intended to be read by the
installation personnel of the parking cooler.
The following instructions are intended to help you use the installation manual
properly:
• The installation manual is part of the scope of delivery and should be stored
carefully.
• The installation manual provides you with important information on the
installation of the device and can also be used as a reference material in the
event of repairs.
• The manufacturer assumes no liability for non-observance of this installation
manual. Any claims are excluded in this case.
3.2
Target group
The installation and configuration information in this manual is intended for
qualified installation personnel who are familiar with the guidelines and safety
precautions to be applied during the installation of lorry accessory parts.
4
Proper use
The CoolAir SP950 parking cooler is designed for supplying the cab of a lorry
with cooled and dehumidified air. It can be used while driving.
The CoolAir SP950I rear panel evaporator unit (ref. no. 9105305612) can only
be operated in combination with a CoolAir SP950C condenser unit. Both
components together form the CoolAir SP950 parking cooler.
A
NOTICE!
• The CoolAir SP950 parking cooler is not suitable for installation in agri-
cultural machines and construction machines or similar equipment. It does
not work properly in the event of strong vibrations and exposure to dust.
• Operating the SP950 parking cooler with voltages other than those
specified can result in damage to the device.
I
NOTE
The SP950 parking cooler is only designed for ambient temperatures of up to
43 °C.
14
CoolAir SP950I
EN
Advertenties
