All manuals and user guides at all-guides.com
DISASSEMBLY PROCEDURE
1. Turn the flame control knob fully to the right (clockwise) to the OFF position and check the flame is completely
extinguished.
2. Allow the lantern to completely cool down.
Hold the lantern firmly, and then turn the gas cartridge clockwise to remove.
3. Place the lantern back into the plastic container - The glass cover is fragile, do NOT transport or carry it without the
plastic container
MAINTENANCE & REPAIR
1. When the pressure falls, gas cannot ignite. Check whether there is fuel remaining inside the gas cartridge – you will hear
and feel liquid gas move when you shake a cartridge. If gas remains the burner may be clogged. Clean away dirt using a
cloth dipped methyl alcohol.
2. Blow through the air intake to clean the burner and jet. Do not insert any pin into the jet for this may cause damage,
leading to a safety hazard.
3. Reinstall and firmly screw down the burner to ensure an airtight seal. Reinstall the gas cartridge according to the
described operation procedures.
4. Regularly inspect the integrated gas seal for damage. Apply warm soapy water at the joint and junction of the equipment
to highlight leaks through the formation of bubbles. If you hear or smell gas don't attempt to ignite the appliance if you can
hear or smell leaking gas. If you smell gas: Do not attempt to ignite equipment; Put out all flames; Disconnect fuel supply.
5. To avoid creating a safety hazard and invalidation do not in any way attempt to maintain, modify, disassemble and repair
your lantern unless covered by this manual.
CAUTIONS AND WARNINGS
Failure to follow the instructions and warning contained in this manual may result in fire, property damage, injury or death.
Never use this lantern in an enclosed space such as a tent, car, camper, or home. The lantern produces odourless carbon
monoxide with an inherent risk of poisoning.
Always use this lantern in a well-ventilated area.
Never place any flammable items on or by the lantern while in use.
Never use the lantern where it could be knocked by unstable objects.
Always place the lantern on a flat and solid area when in use.
Avoid direct sunlight and choose a shady area for use.
Never use this lantern near a heat source that can cause the temperature of the cartridge to increase, leading to an
explosion.
Do not connect the lantern to a remote gas supply.
3