Advertenties
Beschikbare talen
Beschikbare talen
2
IMPORTANT SAFEGUARDS OF GAS CARTRIDGE
1. Do not directly expose a gas cartridge to the sun. It should be kept at under 40°C and stored away from an ignition
source, high temperature and children.
2. Install gas cartridge outdoors in a safe place, away from any flammable source, such as naked fire and electric heater.
3. This gas cartridge is disposable and cannot be refilled and used again.
4. For safety and to protect the environment, dispose an empty canister responsibly and separate from other waste.
5. Do not crush or throw into a combustion source.
OPERATION NOTES
1. Take care when handling the product. Don't drop it.
2. The appliance must be operated on a stable, level, smooth surface. Do not move the lantern during operation.
3. Do NOT touch the glass cover during use of lantern
4. Do not overuse or use the appliance for other than intended purposes.
5. Do not use the lantern near any other heat source – overheating can damage the lantern and become a safety hazard.
6. Keep all inflammable materials away from a lit or hot lantern. We advise one meter in all directions is kept clear of
inflammable materials, like sleeping bag, from the lantern during and after use until the lantern has cooled.
7. Ensure that you keep your face and other body parts away from a lit gas lantern to avoid burns.
8. Be careful when relighting a gas lantern that has just been used. The hot burner may vaporize fuel and a fire or explosion
may result. We advise to wait until the lantern has fully cooled before relighting.
9. When changing the gas cartridge make sure that the lantern is cool and turned off, and keep away from other people.
Properly rotate the lantern and gas cartridge to avoid danger caused by fuel leakage. After using, separate the lantern and
gas cartridge and store the gas cartridge away from the lantern.
OPERATING PROCEDURES
1. Take the lantern out of the plastic container. Make sure the control knob is closed
2. Place lantern onto gas canister
3. Place the lantern on a hard and flat surface prior to use
4. Twist glass cover until the igniting hole is completely exposed - release gas and ignite
5. After ignition, twist glass cover immediately until igniting hole is completely
Hidden
6. Turn the flame control knob to control the flame based on need.
7. A normal flame should be stable and burn upward with a blue or saffron yellow colour depending on flame control.
All manuals and user guides at all-guides.com
Advertenties
