Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Assembling the drain lid
1
2
Safety devices in the cooking lid
ATTENTION!
•
Make sure that the valves are never covered by other objects (e.g. potholders).
The pot lid has various safety devices:
– Steam release valve
– Safety valve
Steam release valve
To prevent overpressure from accumulating inside the pot, the steam release valve will
automatically release steam from the inside of the pot. If pressure is built-up inside the
pot, the valve head will automatically be raised so that excessive steam can be released.
This will maintain an inner pressure of no more than 0.04 bar. As soon as steam is
emitted from the steam release valve, you can reduce the heat supply somewhat.
Safety valve
The safety valve is an additional safety device that is built into the lid. If the pressure
release valve is plugged and/or defective, steam is released via the safety valve and the
inside pressure is kept at a low level. If this occurs, immediately interrupt the heat supply
and take the pot off of the stove. Wait until the pot has cooled off. Check the valves and
clean them if necessary (see chapter "Cleaning and storage"). Only continue cooking if
the pot, lid and the valves are fully functional!
All manuals and user guides at all-guides.com
15
1. Hook the one end of the handle into the drain lid..
2. Screw the other end of the handle to the lid using the
screw, the rubber seal and the washer.
EN
Advertenties
Hoofdstukken
Inhoudsopgave
