9. Use the Temp button to enter a cooking temperature. You can choose a cooking
temperature in the range of from 50 °C - 200 °C. You can also adjust the cooking
temperature at any time during use by pressing the Temp button; when you get to
200 °C, the temperature display reverts back to 50 °C again.
10. Press the Start/Stop button to switch on the device.
11. The stirring mechanism will now continuously stir all of the ingredients around. Hot air
will circulate uniformly around the food inside the container and will be dissipated via the
ventilation slots in the lid.
12. Once the cooking time which is set elapses, the heat supply will automatically switch
off and a buzzer will alert you to the fact that the time set on the timer has elapsed.
The fan continues running for some time until the temperature of the device is reduced
suffi ciently. Never remove the plug from the mains socket during this time. If you want to
stop the cooking process before the timer has fi nished, press the Start/Stop button.
13. Open the lid by holding the handle to pull up the lid.
15. Allow the device to cool down and remove the plug from the mains socket not until the
fan stops running.
16. Clean the device after each use (see "Cleaning" section). Do not allow any food residues
to dry on.
02415_DE-GB-FR-NL_V1.indb 28
02415_DE-GB-FR-NL_V1.indb 28
14. Open up the fold-out handle of the container by pulling the
button on the handle in the direction of the arrow and then
pulling the handle up. Remove the container so that you
can remove the food which you have prepared more easily.
Always use oven cloths or kitchen gloves when removing the
container or the food in order to prevent any injuries.
17. To remove the stirring mechanism from the container, use
your index fi nger and middle fi nger to reach under the
two hooks on the side of the release mechanism (on the
top of the stirring mechanism). Press on the button in the
middle with your thumb and at the same time pull up with
your index fi nger and middle fi nger. The release mechanism
will release itself and the stirring mechanism can then be
removed.
28
21.04.11 15:17
21.04.11 15:17