Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Introduction
The following pictograms are used in these operating instructions / on the device:
Refer to operating manual!
Follow warnings and safety notices!
Never use hydrogen, oxygen, carbon
dioxide or other bottled gasses as an
power source
Wear ear protection, dust mask, safety
glasses and protective gloves.
Pneumatic impact wrench
PDSS 310 A1
Introduction
Congratulations! You have chosen a high-
quality device from our company. Famili-
arise yourself with the product before
using it for the first time. In addition, please carefully
refer to the operating instructions and the safety
advice below. Initial operation of this tool must be
performed by trained personnel.
KEEP OUT OF THE REACH OF CHILDREN!
Intended use
This air powered impact driver is suitable for loose-
ning and tightening screw connection during as-
sembly and repairs, and for loosening bolts when
changing tyres. Only use the product as described
and for the specified applications. Keep these in-
structions in a safe place. When passing this product
on to others please also include all documents. Any
use not specified is prohibited and potentially dan-
gerous. Damages resulting from noncompliance or
misuse are not covered by the warranty and are
not included in the manufacturer's liability. This de-
vice has been designed for household use and may
not be used for commercial or industrial purposes.
48 GB
73786_par_Druckluft-Schlagschrauber PDSS 310 A1_content_LB2.indd 48
All manuals and user guides at all-guides.com
defective.
1
2
3
4
5
6
7
The following parts are considered
accessories:
8
9
10
11
12
13
Air consumption:
Operating pressure:
Square drive:
Compressed air connection: ¼" (6.35 mm) NPT
Tool intake:
Max. torque:
Compressed air hose
Note
Dispose of packaging and device in an
environmentally friendly way!
Features
Verify contents are complete and the de-
vice is in perfect condition immediately
after unpacking. Do not use if the tool is
Adjustable screw
Compressed air connection (for ¼" plug nipple)
Torque control
Trigger
Oil filling port
Pivot bolt (forward / reverse)
Square drive
Extension
Plug nipple (¼" = 6.35 mm)
Machine oil
Lubricator
Allen key
Socket attachments
Technical Data
approx. 350 l / min
max. 6.3 bar
½" (12.7 mm)
½" (12.7 mm)
310 Nm
30.05.12 17:00
Advertenties
Hoofdstukken
Inhoudsopgave
