Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
16.3 Moving the appliance
Unplug the unit from the wall outlet.
Remove all content. Shurely tape down all lose items inside your appliance.
Tape doors shut. Be sure the refrigerator stays in the upright position during
transportation.
17 Troubleshooting
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
17.1 Safety notices
Attention
► Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on electrical equipment.
► Improperly performed repairs can cause considerable dangers for the user and
damages to the device.
17.2 Fault indications and rectification of faults
The following table assists in localizing and rectifying minor faults.
Fault
Your device is not cold
enough or it does not
reach the adjusted
temperature:
The light does not work.
Vibrations
& too much
noise & door does not
close properly
Compressor will not start
Dew on the surface of
cabinet：
Liquid sound
Possible Cause
Check the temperature control setting.
External environment may require a higher setting.
The door is open too often.
The door is not closed completely.
The door seal does not seal properly.
The refrigerator does not have the correct clearance.
Defrost the device.
Contact customer service.
Check to assure that the wine refrigerator is level. Check
the fan. Components are loose. Device touches the wall.
The door is reversed and not properly installed.
The seal is weak. The shelves are out of position.
Room temperature is lower than desired temperature.
The surface of refrigerator especially the glass door appear
some frost if item in a damp room. This is due to the
moisture in the air coming into contact with the cabinet.
Please wipe it away with dry cloth.
1) The sound of compressor when starts or stops working
2) The flowing sound of refrigerant in the refrigeration
34
Advertenties
Inhoudsopgave
