Advertenties
Beschikbare talen
Beschikbare talen
28
Operation
3.8 Machine Features
EN
• With 24 Volt heater output, it ensures the prevention of the transformer failures whereas safety
24-V Heater Output
requirements are met.
• The fan will not operate when the machine is in idle position with the smart fan control. The fan is activated
Smart Fan Control
when the machine reaches a certain temperature. This saves energy and reduces iron dust entering the
machine.
• Smart thermal control ensures digital thermal control and fan control accordingly.
Smart Thermal Control
• The parameters such as the initial gas, final gas, burn back control are easily adjusted via the digital interface.
Parameter Setting with Digital Interface
• Source and media information is stored in real time form thanks to its magNET-ready structure.
Magnet Compatibility
Some values can be read on the LCD panel on the machine front, while other information (Original
Equipment Activity-OEE, Welding Parameters-WR, Quality, etc.) can be stored and monitored or reported
on the magNET platform. (Optional)
• Suitable for operation with generators. The kVA operating value should be determined by referring to the
Operation with generators
technical specifications.
• If the mains voltage is too high or too low, the machine automatically protects itself by giving an error code
Voltage Protection
on the display. By this means, no damage is caused to the machine components and long life of the machine
is ensured. After the ambient conditions have returned to normal, the machine functions will also be
activated.
USER MANUAL
COMPACT ECO SERIES
www.magmaweld.com
Advertenties
