Instruction manual
•
Power button: Press to turn unit "ON" or "OFF". The current
humidity level will be displayed with the defaults of the continuous
mode "CO" and the compressor will then start immediately
dehumidification with the power indicator lamp on, when the
compressor stops the light will flash.
•
Mode: use to switch between the different modes.
–
Dehumidify
–
Fan
–
Laundry
•
humidity: "CO" (continuous), 30 to 90% and "AU" (comfort). The
default mode is "CO". Note: Press up and down at the same time to
convert the display from temperature (°C) to humidity (%).
•
Speed: Fan speed can be switched between high or low.
Note: In comfortable mode ("AU") with a room temperature above 27
degree and in Laundry mode the fan speed is fixed and cannot be
adjusted.
8
Up-Down (hum+, hum-): Set the required
•
Timer (Regular time range 01-24 hours):
–
In the power on state press timer to set the timer for scheduled
shutdown.
–
In the off state press timer to set the timer for scheduled start of
the dehumidifier.
•
Swing: Swing function on/off, pressing the button when the
dehumidifier is on will let the louver swing continuously, press the
button again to let the louver stop moving.
•
Child lock: press 5 seconds to activate the child lock function,
all other functions will not work when activated, to disable the child
lock press the same button again for 5 seconds.
•
WiFi: To set the dehumidifier in pair mode, press and hold
the Wi-Fi button until you hear 3 beeps, it could take about 6 seconds.
USE
•
When the dehumidify mode is set to "CO" the dehumidifier will
continue to operate regardless of the humidity level.
•
When the dehumidifier is set to a required humidity level the
compressor and fan will run if the indoor humidity level is higher or
equal to 3% or more of the set humidity. After the humidity in the room