Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
The following conditions can also affect the body fat and body water:
–
Bathing
–
Eating and / or drinking
–
Menstruation
–
Workout / sweating
–
Taking medications
–
Going to the toilet
Determining body fat and body water
Entering the parameters (programming mode)
You will need to enter the following parameters in your user profile before the scale can
determine your body fat and body water: Profile number, gender, size and age.
The parameters are entered using the following buttons (on the display on the front of the scale):
p
Increasing a value
q
Lowering a value
SEt
Starting the programming mode; confirming the selected value and switching to the
next parameter
•
The adjustable value will begin to blink once the programming mode has been
started using the SEt button. The scale will automatically end the programming
mode if no other buttons are pushed during this period. No other data can be
changed and all of the values that have been set and stored are displayed in single
cycle. To return to the programming mode, wait until the device turns itself off
automatically and then press the SEt button to restart the programming mode.
The profile number will begin to blink again and you will be able to continue making
entries. The values you selected for the parameters before will still be available.
•
You can select whether weights should be shown in kilogrammes (kg), pounds (lb)
or stones (st : lb) and body sizes in centimetres (cm) or feet and inches (' / "). Use
the small Unit button on the underside of the device to set the units.
08215_DE-GB-FR-NL_V1.indb 23
All manuals and user guides at all-guides.com
1. Press the SEt button to activate the programming
mode. The profile number will blink. Use the p and q
buttons to select your desired profile (01 to 10). Press the
SEt button to confirm your selection and to switch to
the next parameter.
2. The symbol for 'male' will flash. Use the p or q button
to switch the symbol to 'female', if necessary. Confirm
your selection using the SEt button.
23
20.02.2013 14:32:47
Advertenties
Hoofdstukken
Inhoudsopgave
