Assembly instructions
Only insert the rechargeable battery
once the equipment is fully assembled.
There is a danger of injury!
Putting the equipment together:
C
Insert the upper blower tube (2) into the lower
blower tube until you hear it latch in.
D
Slide the upper blower tube (2) onto the con-
necting piece (10) on the motor housing (4) until
it locks. The locking button (3) must be pressed
in to slide on the upper blower tube (2). You will
clearly hear the upper blower tube (2) latch into
the locking button (3).
Operation
Observe noise control and local
ordinances.
Switching on and off
Ensure a solid stance and hold the
equipment firmly, with distance to
your body. Before switching on the
equipment, ensure it does not come
into contact with objects.
G
1. Verify the rechargeable battery (9) is insert-
ed (see "Charging-removing / inserting the
battery").
2. To switch on, slide the on/off switch (5)
forward to position "1" or "2". Slide the On /
Off switch (5) forward to position "1" so the
equipment can operate at a lower speed. Or
to position "2" to operate the equipment at a
higher speed.
3. Slide the On/Off switch (5) back to switch off.
39583_Akku-Laubblaeser_DE_AT_NL.indd 57
All manuals and user guides at all-guides.com
Using the equipment
Only use the equipment with the
blower tube attached!
.
Keeping a distance of 5-10 cm from the
ground will provide optimal results when
using the blower.
.
Direct the air stream away from you. Be
careful not to raise heavy objects, resulting in
injuries to others or damage to objects.
.
Before blowing, loosen leaves stuck to the
ground with a broom or rake.
.
In very dry conditions, lightly moisten the
ground to reduce dust exposure.
Checking the battery charge
The charge indicator (7) shows the condition of
the rechargeable battery (9) when starting the
equipment.
Charge the battery when the last LED in
the charge indicator (7) changes from
green to yellow/red.
Cleaning and storage
Have repairs and maintenance not
described in these instructions performed
by our service centre. Only use OEM parts.
Switch off the equipment and remove
the rechargeable battery from the equip-
ment before working on the equipment.
Regularly perform the following cleaning and
maintenance work. This will ensure a long, relia-
ble life.
Cleaning
Never spray down the equipment
or immerse in water. This poses
a risk of electric shock.
Keep ventilation slots, motor housing and
handles on the equipment clean.
Do so using a damp cloth or a brush.
GB
57
08.05.14 16:49