Inhoudsopgave
Advertenties
Outside diameter and thickness of the tool bit must correspond to the
dimensions stated on your electric tool. Attachments of the wrong size cannot
be shielded and controlled properly.
Discs, flanges, and other attachments must precisely fit the spindle of your
electric tool. Tool bits which do not precisely fit the spindle turn irregularly,
vibrate and can cause loss of control.
Do not use attachments which have been damaged in any way. Check
attachments such as grinding discs for missing bits and cracks. If the tool or
the attachment has been dropped, check it for damage or use an undamaged
item. After the attachment has been checked and attached, please keep
yourself and other persons out of the rotating area of the attachment and let
the machine run at full speed for one minute. Most damaged attachments and
tools will fail within that time.
Wear personal protective equipment. If necessary and depending
on the application, wear full face protection, eye protection, or
safety goggles. If necessary, wear a dust mask, ear protection,
safety gloves or a safety apron which protect you from flying
fragments. The eyes must be protected from flying debris, which
are generated by many operations. Dust must be filtered out by the
dust mask or breath protection. If you are exposed to high levels of
noise for extended amounts of time, your hearing may be damaged.
Implement additional safety measures to protect the operator from
the effects of vibration, such as servicing the power tool and application tools,
keeping their hands warm, and organis organising workflows correctly.
Keep other persons at a safe distance from your working area. Persons
entering your working area must wear personal protective equipment.
Fragments of the workpiece or the attachment may be thrown away and
cause injuries outside the immediate working area.
Hold the tool only by the isolated handles while undertaking work during
which the tool or the attachment can touch hidden life wires or its own power
cable. Contact with life wires can cause metal parts of the housing to become
life and can cause electric shock.
Keep the power cable away from the spinning attachment. If you loose control
over the electric tool the power cord may be cut or become caught and your
hand or arm may be caught in the attachment.
Do not lay down the electric tool before the attachment has stopped spinning.
The spinning attachment may come in touch with the surface, which may
cause loss of control.
16
Advertenties
Inhoudsopgave
