Advertenties
Beschikbare talen
Beschikbare talen
B
Product usage
2x
2x
1.
Get the machine laid on the floor, using some soft material like foam or clothes between
the machine and floor for a protection;
2.
Stick the longer sponges to the longer bottom edges of machine, and the shorter sponges
to the shorter bottom edges, Installation of panel is same as sponges.
Operation
Quick Start
Caution!
•
Before washing, please make sure the washing machine is installed properly.
•
Your appliance was thoroughly checked before it left the factory. To remove any
residual water and to neutralize potential odors, it's recommended to clean
your appliance before first use. For this reason, start the Cotton program at
90°C without laundry and detergent.
Calibration
It's recommended to calibrate the washing machine, so that provide the best performance.
The appliance is able to detect the amount of laundry loaded. This function is optimizing the
product performance by minimizing energy and water consumption, saving you money and
time. For this reason it's recommended to calibrate the appliance for best use.
1.
Remove all accessories from the drum and close the door;
2.
Insert the mains plug to the socket;
3.
Switch on the washing machine and press "Boost" and "Temp." simultaneously for
4.
Press [
] to start the appliance and wait till "****" is displayed, and then "***"
(such as "126") is displayed to indicate the real time drum speed.
If the machine is successfully calibrated, "PA5" will be displayed, otherwise, "FAL"
will be displayed.
44
EN
Advertenties
