Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
LOCATION AND INSTALLATION REQUIREMENTS
M EC HAN ICAL PRO B LE MS
• In accordance with safety regulations, the lowest point of the fan blades must be at least
2.3 meters from the ground.
• Make sure that the chosen location does not allow the rotating blades to come into contact
with any objects.
• Check that the ceiling joists are secure and large and strong enough to support the weight
of the fan.
• To reduce the risk of fire, electric shock, or personal injury, make sure the fan mounting
bracket is attached directly to the building structure. Do not mount to a distribution box.
• The mounting bracket must be securely bolted to a supporting structure, such as a con-
crete ceiling, steel structure, or wood frame. If a wooden frame is added, it must be nailed
or screwed securely between two joists.
• To reduce the risk of personal injury and property damage, do not bend or damage the ver-
tical rod or fan blades when handling or installing the fan. If you detect any damage to the
product, contact our after-sales service before installing the fan.
• Make sure the fan is securely attached to the ceiling. All set screws should be checked and
retightened as necessary before the fan is started.
• To reduce the risk of injury, do not touch the blades when the fan is running.
E LECTRI C P ROB L E MS
• Turn off the power before doing any work on the ceiling fan and turn off the power breaker.
To avoid possible electrical shock, make sure power is off at the fuse box or circuit breaker
panel before wiring.
• The fan, mounting bracket, and lighting equipment must be grounded. Check that all splic-
es are well insulated.
• Check and confirm that all connections are correct and secure. Once all electrical connec-
tions have been made, store all cables well.
• Do not attempt to control this fan from a wall switch or remote control that is not approved
by the manufacturer for use with the fan. DO NOT use a solid state controller. Use of a
non-approved wall switch or remote control will void the warranty.
• Do not connect the ceiling fan to a dimmer switch.
• Mark the correct position of the holes and fix the ceiling bracket using the screws with
metal anchors or screws and washers appropriate to the type of ceiling chosen.
• Check the correct installation of the bracket before hanging the fan. This plate must sup-
port the entire weight of the fan.
E NGL I SH
8
INSTALLATION INSTRUCTIONS
Advertenties
Inhoudsopgave
