Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. Place the down tube with hanger ball on the mounting bracket, rotate the motor assembly
until the mounting bracket check tab has dropped into the hanger ball registration slot
and is seated firmly.
5. Lift the canopy up to the ceiling to cover the mounting bracket (make sure the canopy sits
on the two screws on the bracket), rotate the canopy to make sure the head of the screw is
at the end of the holes, and finally tighten the screws. screws until secure.
DECOR AT IV E SCRE E N F I XING
Make sure the slot on the decorative light shade is in the same line as the slot on the fan
body, then rotate the shade slightly clockwise until it is tight and secure.
C H ECK THE I NSTALL AT IO N
• Check the correct operation of the ceiling fan, checking that there is no strange movement
or misalignment in any part of the fan.
• In the event that some type of buzzing/vibration can be seen, you can proceed to adjust the
blades with the balancing kit.
• In this kit you have self-adhesive weights and clips in the form of "u".
E NGLI SH
11
Advertenties
Inhoudsopgave
