Download Print deze pagina

Kärcher HDS-E 8/16-4M 12kW Originele Gebruiksaanwijzing pagina 27

Verberg thumbnails Zie ook voor HDS-E 8/16-4M 12kW:

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 57
Take out detergent suck supports.
Clean filter in water and reinstall.
Ready a catch bin for appr 1 Litre oil.
Loosen release screw.
Dispose of old oil ecologically or turn in at
a gathering point.
Tighten release screw.
Fill oil slowly up to the MAX marking.
Air pockets must be able to leak out.
DANGER
Risk of injury by inadvertent start-up of ap-
pliance and electric shock. Prior to all work
on the appliance, switch off the appliance
and pull the power plug.
1
– Lack of oil
Replenish oil.
2
– Leak in the high pressure system
Check high pressure system and con-
nections for tightness.
3
– Lack of water after 2 minutes - the pump
is switched off to prevent dry runs.
Check water supply, check connec-
tions.
4
– Heater contactor fault
Set the appliance switch to 0/OFF".
Turn on the appliance.
– Error occurs repeatedly.
Inform Customer Service.
– Lack of water - heater is switched off
Check water supply, check connec-
tions.
– No line voltage, see Appliance is not
running .
– Heater operation
2
– Engine overload/overheat
Set the appliance switch to 0/OFF".
Allow device to cool down.
Turn on the appliance.
– Error occurs repeatedly.
Inform Customer Service.
3
– Fault in the voltage supply.
Check main connections and mains
fuse.
4
– Excessive power consumption.
Check main connections and mains
fuse.
Inform Customer Service.
1
– Temperature limiter has got triggered.
Set the appliance switch to 0/OFF".
Allow device to cool down.
Turn on the appliance.
– Error occurs repeatedly.
Inform Customer Service.
3
– System care detection defective
Inform Customer Service.
4
– Temperature sensor defective
Inform Customer Service.
– Service interval
Perform service work.
EN
27

Advertenties

loading

Deze handleiding is ook geschikt voor:

Hds-e 8/16-4m 24kwHds-e 8/16-4m 36kw