Download
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Kärcher Handleidingen
  4. Hogedrukreinigers
  5. HDS-E 8/16-4M 12kW
  6. Originele gebruiksaanwijzing

Kärcher HDS-E 8/16-4M 12kW Originele Gebruiksaanwijzing pagina 26

Verberg thumbnails Zie ook voor HDS-E 8/16-4M 12kW:

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 57
CAUTION
Risk of personal injury or damage! Consid-
er the weight of the appliance when storing
it.
6
ATTENTION
Risk of damage! When loading the appli-
ance with a forklift, observe the illustration.
ATTENTION
Protect the trigger from damage during
transport.
CAUTION
Risk of personal injury or damage! Mind the
weight of the appliance during transport.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
DANGER
Risk of injury by inadvertent start-up of ap-
pliance and electric shock. Prior to all work
on the appliance, switch off the appliance
and pull the power plug.
Shut off water supply.
Open the hand spray gun.
Switch on the pump with the power
switch and allow to run for about 5-10
seconds.
Close the hand spray gun.
Set the appliance switch to 0/OFF".
Pull main plug out of socket with dry
hands only.
Remove water connection.
Activate hand spray gun until device is
pressure less.
Secure the trigger gun. To do so, push
the safety catch towards the front.
Allow device to cool down.
26
Clean the sieve in the water connection.
Clean the fine filter.
Check oil level.
ATTENTION
Risk of damage! In case of lacteous oil in-
form Kärcher customer service immediate-
ly.
Clean the sieve in the safety block.
Clean filter at the detergent suck hose.
4
Check the calcification degree of the
boiler and consider having it cleaned by
customer service.
5
Oil change.
Have the maintenance of the device
performed by the customer service.
Take out sieve.
Clean sieve in water and reinstall.
Unpressurize the appliance.
Unscrew the fine filter from the boiler.
Remove the fine filter and the filter in-
sert.
Clean the filter with clean water or com-
pressed air.
Reinstall in reverse sequence.
Loosen covering nut and take off hose.
Take out sieve.
If necessary turn in screw M8 appr. 5
mm inwards and therewith pull out sieve.
Clean sieve in water.
Push sieve inwards.
Put on hose.
Tighten covering nut firmly.
EN

Advertenties

loading

Gerelateerde Handleidingen voor Kärcher HDS-E 8/16-4M 12kW

Gerelateerde Producten voor Kärcher HDS-E 8/16-4M 12kW

Deze handleiding is ook geschikt voor:

Hds-e 8/16-4m 24kwHds-e 8/16-4m 36kw