Download
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Kärcher Handleidingen
  4. Hogedrukreinigers
  5. HDS-E 8/16-4M 12kW
  6. Originele gebruiksaanwijzing

Kärcher HDS-E 8/16-4M 12kW Originele Gebruiksaanwijzing pagina 24

Verberg thumbnails Zie ook voor HDS-E 8/16-4M 12kW:

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 57
Set appliance switch to desired operat-
ing mode.
Indicator lamp for operational readiness
lights up.
The device starts briefly and turns off, as
soon as the working pressure is reached.
If the indicator lamps for pump, lack
of water, boiler malfunction or motor, turn
off the appliance immediately and repair
malfunction, refer to Help with malfunc-
tions .
Release the trigger gun. To do so, push
the safety catch towards the back.
When activating the hand spray gun the de-
vice switches back on.
If no water comes out of the high
pressure nozzle, vent pump. Refer to Help
with malfunctions - appliance is not building
up pressure .
Set temperature regulator to desired
temperature.
3
5
– Clean with hot water.
Turn the regulation spindle in a clock-
wise direction: Increase working pres-
sure (MAX).
Turn the regulation spindle in an anti-
clockwise direction: Reduce working
pressure (MIN).
Set the working pressure/quantity regu-
lation at the pump unit to maximum
quantity.
Set the working pressure and feed
quantity by turning (steplessly) the
pressure/quantity regulation mecha-
nism at the hand spray gun (+/-).
24
DANGER
Risk of injury! When adjusting the pressure/
quantity regulation, make sure that the
screw connection of the spray lance does
not become loose.
For long term work with low pres-
sure, set pressure at the pressure/quantity
regulation of the pump unit.
– For considerate treatment of the envi-
ronment use detergent economically.
– The detergent must be suitable for the
surface to be cleaned.
With support of the detergent dose
valve set detergent concentration as
determined by the manufacturer.
Recommended values at the control
panel at maximum working pressure.
Set pressure/temperature and deter-
gent concentration according to the sur-
face to be cleaned.
To prevent damage due to too much
pressure, always position high pressure ray
first from a greater distance towards object
to be cleaned.
– Loosen the dirt:
Spray detergent economically and let it
work for 1...5 minutes but do not let it
dry up.
– Remove the dirt:
Spray off loosened dirt with the high
pressure jet.
Removal of light contaminations and clear
rinse, i.e.: Gardening tools, terrace, tools,
etc.
Set operating pressure according to
need.
The appliance works in the most economi-
cal temperature range.
The temperature can be regulated
up to 60 °C.
EN
6

Advertenties

loading

Gerelateerde Handleidingen voor Kärcher HDS-E 8/16-4M 12kW

Gerelateerde Producten voor Kärcher HDS-E 8/16-4M 12kW

Deze handleiding is ook geschikt voor:

Hds-e 8/16-4m 24kwHds-e 8/16-4m 36kw