Whitehaven Fan Installation Instructions
NOISE:
When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and
frequency signals superimposed in the electricity for off-peak hot water control, may cause a change in fan
motor noise. This is normal. Please allow a 24-hour "breaking-in" period, most noises associated with a new
fan disappear during this time. All electric motors are audible to some extent. Please note that this is not a
product fault, and as such is not coverd under warranty.
CARE AND CLEANING:
•
Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free cloth
to avoid scratching the paint finish. Please turn off electricity power when you do so.
•
Do not immerse your ceiling fan in the water. It could damage the motor or the blades and create the
possibility of an electrical shock.
•
Ensure that the fitting does not come in contact with any organic solvents or cleaners.
•
To clean the fan blade, wipe with only a damp clean cloth with NO organic solvents or cleaners.
•
The motor has a permanently lubricated ball bearing so there is no need to oil.
NOTE: Always turn OFF the power at the mains switch before attempting to clean your fan.
FAN models
56 " FAN without light
56 " FAN with light
IN AUSTRALIA / NEW ZEALAND – Please refer to the separate WARRANTY STATEMENT.
IN EUROPE – If you are a European customer please contact the retail outlet where the fan was purchased
for warranty service.
11 | P a g e
TECHNICAL INFORMATION
Rated power
Rated Voltage
220-240VAC
220-240VAC
WARRANTY INFORMATION
Rated Power
(motor)
(Lamp)
35W
35W
GX53, 18W
Battery for remote
N/A
3V, CR2032
3V, CR2032