Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Whitehaven Fan Installation Instructions
3. Install a new 3V CR2032 DC battery in the compartment. Please make sure the polarity of the battery is correct. (Fig.
10c)
Please make sure the polarity of
the battery is correct.
4. Install the battery compartment cover back onto the remote and secure by re-tightening the screw.
Remote Control Buttons
1 - FAN SPEED CONTROL BUTTON:
There are 6 available speeds. "I" button is for the lowest speed, and "VI" button is
for the fastest speed.
NOTE: when you turn on the fan for the first time or switch the main power to the
controller, you need to start the fan on hight "VI" speed first and then choose a
lower speed. A 5-10 seconds is required to allow the DC fan to respond to the
remote each speed or fan direction seletions.
2 - FAN OFF BUTTON:
Press the button to turn the fan off.
3 - REVERSE FUNCTION BUTTON:
Press the button to activate the reverse running function. The fan must be operating
to activate the reverse function.
4 - LIGHT CONTROL BUTTON:
Press the button to turn the light ON/OFF.
9 | P a g e
Fig. 10b
Fig. 13
Fig. 11
Fig. 10c
Advertenties
Inhoudsopgave
