Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6.1 Adjusting the water softener
German
degrees
(°dH)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soft-
ener manually and electronically.
Manual adjustment
Electronic adjustment
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode. Refer to
'SETTING AND STARTING A PRO-
GRAMME'.
2. Press and hold function buttons (B)
and (C) at the same time until the in-
dicators above function buttons (A),
(B) and (C) start to flash.
3. Press function button (A).
Water hardness
French
mmol/l
degrees
(°fH)
91 - 125
9.1 - 12.5
76 - 90
7.6 - 9.0
65 - 75
6.5 - 7.5
51 - 64
5.1 - 6.4
40 - 50
4.0 - 5.0
33 - 39
3.3 - 3.9
26 - 32
2.6 - 3.2
19 - 25
1.9 - 2.5
7 - 18
0.7 - 1.8
< 7
< 0.7
Clarke
degrees
64 - 88
53 - 63
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
Turn the water hardness dial to the posi-
tion 1 or 2.
• The indicators above function but-
tons (B) and (C) go off.
• The indicator above function but-
ton (A) continues to flash.
• The display shows the current set-
ting of the water softener, e.g.
= level 5.
4. Press function button (A) again and
again to change the setting.
5. Deactivate the appliance to confirm
the setting.
ENGLISH
25
Water softener
adjustment
Manual
Elec-
tronic
1)
10
2
1)
9
2
1)
8
2
1)
7
2
1)
6
2
1)
1)
2
5
1
4
1
3
1
2
2)
2)
1
1
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
