Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
44
What to do if...
Fault code and malfunction
• continuous flash of the light of
the running programme
• intermittent audible signal
• 1 flash of the end-of-pro-
gramme indicator light
The appliance does not fill with wa-
ter
.
• continuous flash of the light of
the running programme
• intermittent audible signal
• 2 flashes of the end-of-pro-
gramme indicator light
The appliance will not drain the wa-
ter.
• continuous flash of the light of
the running programme
• intermittent audible signal
• 3 flashes of the end-of-pro-
gramme indicator light
Anti-flood device operates
The programme does not start
After the check, switch on the appliance. The programme continues from the point of
interruption. If the malfunction shows again, contact your Service Force Centre.
For other fault codes, not described in the chart, contact your Service Force Centre.
These data are necessary to help you quickly and correctly:
• Model (Mod.)
• Product number (PNC)
• Serial number (S.N.)
For these data, refer to the rating plate.
Write the necessary data here:
Model description : ..........
Product number : ..........
Serial number : ..........
All manuals and user guides at all-guides.com
• The water tap is blocked or furred with limescale.
• The water tap is closed.
• The filter in the water inlet hose is blocked.
• The connection of the water inlet hose is not correct. The
• There is a blockage in the sink spigot.
• The connection of the water drain hose is not correct. The
• Close the water tap and contact your local Service Force
• The appliance door is not closed.
• Mains plug is not connected in.
• The fuse has blown out in the household fuse box.
• Delay start is set.
Possible cause and solution
Clean the water tap.
Open the water tap.
Clean the filter.
hose can be kinked or squashed.
Make sure that the connection is correct.
Clean the sink spigot.
hose can be kinked or squashed.
Make sure that the connection is correct.
Centre.
Close the door.
Put in the mains.
Replace the fuse.
Cancel the delay start to start the programme immedi-
ately.
Advertenties
Hoofdstukken
Inhoudsopgave
