Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
Connection and control elements
(46) EFFECT SEND/RECEIVE effects loop connection
Connection of an external effect unit.
SEND: connect the input of the effect unit here.
RECEIVE: connect the output of the effect unit here.
(47) LINE sockets
Connections for LINE or PHONO devices to be played back via channels CH1 to CH4.
Sockets LINE1 and LINE3 are switchable using the INPUT SELECT switches (48) to allow you to connect LINE or
PHONO devices to these channels.
(48) INPUT SELECT switches
Use these switches to determine what device type is connected to inputs LINE1 or LINE3.
LINE position: for devices with a line level (e.g. CD player, tape deck)
PHONO position: for record players
(49) MIC2 socket
Connection for a dynamic microphone or a condenser microphone with its own power supply.
You can connect microphones with a TRS connector here.
(50) GND grounding screw
To prevent hum trouble, a ground connection can be established via this screw clamp between the mixer and the
ground line of the record player (usually black cable with clamp-type socket).
38
Advertenties
Hoofdstukken
Inhoudsopgave
