Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Connection and control elements
(20) LAMP 12V socket
Here you can connect a lamp to illuminate the mixer.
Only connect lamps with an operating voltage of 12V, a BNC connector and a maximum current
consumption of 120 mA.
(21) POWER switch
The mixer is switched on or off using this switch.
In the ON position, the mixer is switched on. In the OFF position, the mixer is switched off.
(22) EQUALIZER switch
The integrated equalizer (6) is switched on or off using this switch.
The LED next to the switch lights up when the equalizer is switched on.
(23) MIC BASS control
Bass control for the microphone channel.
Turn it clockwise to amplify the bass. Turn is anti-clockwise to attenuate the bass.
(24) MIC controls (1+2)
Use these controls to set the volume of the respective microphone.
(25) MICROPHONE switch
This switch switches the microphone channels and the talkover function:
ON position: microphones are switched on
OFF position: microphones are switched off
TALKOVER position: the volume of all channels except for the microphone channel is reduced to allow announcements.
(26) MIC CUE switch
Press this switch to route the microphone channel to the headphone channel for pre-listening.
(27) KILL switch (BASS)
This switch kills the bass from the microphone signal.
When the switch is activated, the respective LED lights up.
All manuals and user guides at all-guides.com
35
Advertenties
Hoofdstukken
Inhoudsopgave
