Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
10. Payload Assembly
Page P.17
Upper figure:
If you want to transport payloads like cameras, etc. with your quadrocopter, you may use an optionally available assembly
kit (GAUI-number: 210815) to built a platform at the top of the model.
The figure illustrates platform assembly.
Lower figure:
Instead of the landing gear, four M3 screws and nuts can be used as well. Rods or tubes with a diameter of 6 mm can be
pushed through the openings in the boom arms, to which he payload can be attached.
Page P.18
Weight/power overview
The quadrocopter can be easily flown with a 2-cell LiPo rechargeable battery with 1400 – 2000 mAh. If, however, the take-
off weight is above 550 g, a 3-cell LiPo battery should be used. The following table offers an overview of take-off weight and
power intake to select the matching battery.
Take-off
Additional load,
weight (g)
incl. battery weight (g)
480
80 (2S 1400 mAh)
500
100 (3S 2000 mAh)
550
150 (3S 2000 mAh)
600
200
650
250
700
300
750
350
800
400
850
450
900
500
950
550
1000
600
1050
650
1100
700
The quadrocopter weight without battery is about 400 g.
38
All manuals and user guides at all-guides.com
Power intake (W)
48
50
63
75
84
92
102
111
120
130
142
155
162
170
Weight-/power ratio (g/W)
10
10
8,7
8,0
7,7
7,6
7,4
7,2
7,1
6,9
6,7
6,5
6,5
6,5
Advertenties
Hoofdstukken
Inhoudsopgave
