Advertenties
Beschikbare talen
Beschikbare talen
Display indications and symbols
The symbol and indications are different depending on the model. This is a summary of all possible
symbols and indications for the VC200 series.
Delta symbol for relative value measuring (= reference value measuring)
Autorange/AUTO
stands for "automatic measurement range selection"
Connect terminal
Graphic notice to select the required measuring sockets
H
Data-Hold function is active
OL or 1.
Overload = the measuring range was exceeded
Symbol for the operation switch. Pressed in is switched on.
Battery replacement symbol; please replace the batteries immediately to avoid
measuring errors!
Symbol for the diode test
Symbol for the acoustic continuity tester
AC
Alternating current for voltage and current
DC
Direct current for voltage and current
mV
Millivolt (exp.-3)
V
Volt (unit of electric potential difference or voltage)
A
Ampere (unit of electric current)
mA
Milliampere (exp.–3)
µA
Microampere (exp.–6)
Hz
Hertz (unit of frequency)
kHz
Kilohertz (exp.3)
MHz
Megahertz (exp.6)
Ω
Ohm (unit of electric resistance)
kΩ
Kiloohm (exp.3)
MΩ
Megaohm (exp.6)
nF
Nanofarad (unit of electric capacity, exp.-9, symbol
µF
Microfarad (exp.-6)
Symbol for the diode test
Lightning symbol appears in the voltage measurement range 600 V
36
All manuals and user guides at all-guides.com
)
Advertenties
