Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Automatic Operation
1. Turn on the collar and the remote control. Hold the power button
for 3 seconds until the icons on the collar start flashing.
2. Press the start button on the remote control to pair the collar.
Ensure the number 1 is visible on the right side of the LED display,
and press the start button again to check if the collar is paired.
3. To switch to automatic operation, press
the button once.
The
icon will then appear on the LED display and you will hear
a beep. This confirms that the collar has switched to automatic
mode. To return to manual operation, press the button again.
4. Use the mode button on the collar to select the desired mode.
Mode button lit: Beep and vibration mode is activated.
Power button lit: Ultrasonic mode is activated.
To adjust the sensitivity of the collar in automatic mode, use the
remote control. Press the M button on the remote control until you
see the
symbol on the LED display. Use the rotary switch to
adjust the sensitivity. 1 is the highest sensitivity, 8 is the lowest.
At 1, the collar will react slowly, and at 8, it will react the fastest.
9
Advertenties
Inhoudsopgave
