Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5. Turn the left adjustment knob (11) to set the intensity of the selected effect between
1 and 9.
Available special effects
F1-12:
Pulsating / Campfire / Lightning / Explosion / TV / Candle / Defective light bulb /
Breathing / Paparazzi / SOS / Flame / Fading
F1-F8:
Cop car / Party / Fireworks / Disco / Ambulance / Fire siren / RGB loop / Weld-
ing
CHANNEL SETTING
For this LED light, a channel can be set for synchronization with other luminaires and
thus controlled via 2.4G remote control*.
1. Press the [CH] button (18) to enter the channel setting mode. The <CH> display flash-
es.
2. Turn the right adjustment knob to set a channel between 1 and 99.
Note:
Read the section "Remote control" in these instructions!
APP CONTROL
With the free "Smart Life" app, these and other devices can be controlled via a smart
device (e.g. tablet PC, smartphone).
To connect the studio light to a smart device and the app, follow these steps.
1. Use the link or the QR code below to download the "Smart Life" app.
DOWNLOAD THE APP:
https://smartapp.tuya.com/smartlife
Note:
To be able to use the app, you must register with a valid e-mail address, via which
you will receive an activation code. Give the app access to your local network and
your home's data as well as to the Bluetooth function to ensure that it works
properly.
2. Switch on the studio light.
3. Press the Bluetooth button (10) for about 3 seconds to activate the Bluetooth con-
nection for the studio light.
4. Activate Bluetooth on your smart device and launch the 'Smart Life' app.
5. Select the [Add device] option under the "Home" section in the app.
6. Select the studio light from the list of available devices to connect it to your smart
device and the app.
As soon as the studio light is connected, you can control the device via the app.
Note:
If the connection fails, add the desired device manually via the app. Select one at
> [Add device].
9
GB
Advertenties
Inhoudsopgave
