Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION VIA NP-F970 TYPE RECHARGEABLE BATTERIES* (OPTIONAL)
IMPORTANT:
Only use the recommended battery type! The manufacturer accepts no liability
for voltage damage caused by the use of unsuitable or unauthorized batteries*
for the power supply!
Note:
To ensure a sufficient power supply, two NP-F970 batteries* must always be in-
serted in the holders.
1. Insert the NP-F970 battery* into the holder (8) at the edge opposite to the metal
contacts and then slide it towards the contacts so that the notches on the side of the
battery reach under the corresponding catches on the holder.
2. Move the on/off voltage selector switch (13) to the 'I' (DC) position to switch the
light on. The last setting is displayed on the LED screen and the light operates ac-
cording to the last setting.
3. To disconnect the power supply, move the on/off voltage selector switch (13) to the
'0' (off) position.
4. To remove the battery*, push the battery* gently to the right or left and pull it out
of the holder (8).
POWER SUPPLY VIA V-MOUNT BATTERY* (OPTIONAL)
IMPORTANT:
Only use the recommended battery type! The manufacturer accepts no liability
for voltage damage caused by the use of an unsuitable or unauthorized battery*
for the power supply!
1. Slide the V-mount battery* into the V-shaped holder (16) from the right so that the
power contacts of the battery reach the voltage socket (7) on the opposite side.
2. Move the on/off voltage selector switch (13) to the 'I' (DC) position to switch the
light on. The last setting is displayed on the LED screen and the light operates ac-
cording to the last setting.
3. To disconnect the power supply, move the on/off voltage selector switch (13) to the
'0' (off) position.
4. To remove the battery*, press and hold the battery release button (14) and pull the
battery to the right out of the holder (16).
POWER SUPPLY VIA THE SUPPLIED POWER SUPPLY UNIT
IMPORTANT:
Only use the supplied power supply unit and the corresponding cables! The man-
ufacturer accepts no liability for voltage damage caused by the use of unsuitable
or unauthorized components for the power supply!
1. Insert the 2-pin power plug (22) of the power supply unit (21) into the 2-pin pow-
er connection socket (20) on the back of the light. Screw the knurled cap onto the
thread on the power connection socket.
2. Insert the C7 device plug (25) of the mains cable (24) into the C8 connection socket
(23) of the power supply unit.
3. Insert the Euro mains plug (26) into the power outlet (mains voltage: 100-240V).
4. Move the on/off voltage selector switch (13) to the 'II' (AC) position to switch the
*not included in the scope of delivery
7
GB
Advertenties
Inhoudsopgave
