Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
ADJUSTING THE TILT ANGLE
1. Hold the LED light firmly and slowly loosen the locking screw for the tilt joint (2).
2. Bring the light head into the desired position and hand-tighten the locking screw (2)
again.
MOUNTING ON A TRIPOD*
Loosen the fastening screw (4) for the tripod connection (3) so far that the opening of
the tripod connection is exposed.
Place the LED light with the opening on the Spigot adapter* of a tripod* and tighten
the fastening screw (4).
REMOTE CONTROL*
This light can be operated with the optionally available BRESSER 2.4G remote control
(Art. No. F004514), which supports multiple light control for up to 99 channels.
Note:
Read the instruction manual for the remote control to find out more about con-
necting and using the remote control.
DMX CONTROL
This LED light is equipped with two DMX connection sockets (12) that can be used to
connect a console for DMX control via RJ45 cable.
1. After connecting the DMX console, press the [DMX] button (17) to set the LED light
to DMX control mode. <DMX> appears in the display.
2. In DMX control mode, press the [CH] button (18) to enter the channel settings. The
<CH> display flashes.
3. Turn the right adjustment knob (19) to set a DMX channel between 1 and 512
Note:
Please also read the instruction manual for your DMX console for more detailed
information on the connection and control options.
DISPOSAL
Dispose of the packaging materials according to their type. Observe the current
legal regulations when disposing of the device! Information on proper disposal
can be obtained from municipal waste disposal service providers or the Environ-
mental Agency.
Do not dispose of electrical appliances with household waste! According to the
European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and
its transposition into national law, used electrical equipment must be collected
separately and recycled in an environmentally sound manner.
CE DECLARATION OF CONFORMITY
A "Declaration of conformity" in accordance with the applicable directives and corre-
sponding standards has been prepared by Bresser GmbH. The full text of the CE
declaration of conformity is available at the following Internet address:
www.bresser.de/download/BR-RGB/CE/F005102_CE.pdf
*not included in the scope of delivery
(2.4G, optional)
(DMX512, optional)
10
(optional)
Advertenties
Inhoudsopgave
