Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Installation
D WARNING
Risk of death due to explosions or electric shock!
Drilling through gas, water or electrical lines can lead to
hazardous situations.
☞ Ensure that there are no lines in the wall at the fastening
points.
☞ Determine the locations of the fastening points and mark
them.
☞ Drill the holes (ø 10 mm) for fastening to the wall.
☞ Insert the wall plugs into the fastening holes.
☞ Drill through the wall (ø 30 mm) to feed the connection
cable through.
☞ Screw the hanger bolts into the wall plugs until they
reach the start of the thread.
☞ Push the spacer sleeves onto the hanger bolts.
38
All manuals and user guides at all-guides.com
Ø 3 0
Ø 1 0
☞ Feed the cable from inside to outside through the hole
via the wall duct:
y Cable from the wall power supply
y Mains and control cables
☞ Feed both cables though the cable duct on the device.
☞ Connect both cables to the device.
6002948_a – 20.11.2019
Advertenties
Hoofdstukken
Inhoudsopgave
