Download Inhoudsopgave Inhoud Print deze pagina

Preparation For Installation; Unpack The Device; Install The Device - Berbel BAL 150 Montagehandleiding

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Installation
3.5.1

Preparation for installation

☞ Familiarise yourself with the installation situation and the
associated documents:
y Device and instructions
y Cooker hood instructions
☞ Assemble the tools and materials required:
y Folding rule or measuring tape
y Pencil
y Spirit level
y Ø 10 mm masonry bit
y Hammer drill
y 6 mm spanner
y 13 mm box spanner
165
y 2.5 mm Allen key
y Construction foam or assembly adhesive
☞ Ensure that the cooker hood is installed properly.
☞ Ensure that the cooker hood is prepared to be connected
to the mains and control cables.
☞ Keep the installation area free of objects that could be in
the way or that could be damaged.
☞ Make sure that the hob and other parts that could be
touched have cooled down.
☞ Protect the hob and other surfaces in the installation area
(e.g. with thick cardboard).
☞ Ensure that the power supply is switched off and remains
so. Connect the power supply only when instructed to do
so in the installation instructions.
50
150
☞ Ensure that the exhaust air duct is prepared correctly in
the wall duct:
y Angled 1-2° outwards
y Inner diameter 150 mm
y Flush with the outside wall
y Internal projection approx. 50 mm
y Fixed with construction foam or assembly adhesive
6002948_a – 20.11.2019
All manuals and user guides at all-guides.com
Hazard of glass breaking or other damage due to
incorrect handling!
The device and its surfaces can be damaged when being
unpacked or transported.
☞ Do not cut into the protective cardboard packaging.
☞ Keep objects that could scratch the device far away from
☞ Unpack the device and all accompanying parts carefully.
☞ Set the device down on a firm, clean and protective
1-2°
☞ Check the device and its constituent parts for damage.
☞ Check the delivery is complete.
If parts are missing or damaged:
☞ Please consult your dealer or customer services.
☞ Remove the packaging material.
1-2°
☞ Determine the hanging position.
3.5.2

Unpack the device

D ATTENTION!
it (e.g. tools, belt buckles).
surface (e.g. thick cardboard).
D "2.2 Scope of delivery" (page 33).
D "7.1 Dispose of packaging" (page 42).
3.5.3

Install the device

113 113
10
78 78
73
30
37

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Inhoudsopgave