Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Maintenance and cleaning
pressing and holding down the system button (A)
for 4s at the same time, until the LED will quickly
start flashing orange (see figure 3).
•
Release the system button again.
•
Press and hold down the system button again for
4s, until the status LED lights up green.
•
Release the system button to finish the proce-
dure. The device will perform a restart.
10
Maintenance and cleaning
The device does not require you to carry out any
maintenance. Enlist the help of an expert to carry
out any repairs.
Before cleaning the device, unplug it from the socket out-
let. Use a dry linen cloth to clean the device. If the device
is particularly dirty, you can slightly dampen the cloth to
clean it. Do not use any detergents containing solvents,
as they could corrode the plastic housing and label. Make
sure that no moisture will ingress into the housing.
40
General information about radio operation
11
General information about radio
operation
Radio transmission is performed on a non-exclusive
transmission path, which means that there is a possibil-
ity of interference occurring. Interference can also be
caused by switching operations, electrical motors or de-
fective electrical devices.
The range of transmission within buildings can
differ greatly from that available in the open air.
Besides the transmitting power and the reception
characteristics of the receiver, environmental
factors such as humidity in the vicinity have an
important role to play, as do on-site structural/
screening conditions.
Hereby, eQ-3 AG, Maiburger Str. 29, 26789 Leer/Ger-
many declares that the radio equipment type Home-
matic IP HmIP-PSM-2 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of con-
formity is available at the following internet address:
www.homematic-ip.com
41
Advertenties
Hoofdstukken
Inhoudsopgave
