Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Hazard information
this capacity could lead to the destruction of the
device, to a fire or to an electrical accident.
The device may only be connected to an easily ac-
cessible power socket outlet. In case of danger,
disconnect the device from the power socket out-
let.
Only use the device with properly installed wall
outlets with earth contacts and not with multiple
socket outlets or extension cables.
Do not connect devices to the pluggable switch
and meter which could cause fire or other types of
damage in unattended operation (e.g. irons).
Remove the plug of the connected device from
the pluggable switch and meter, whenever you
make changes or modifications to the device.
Always lay cables in such a way that they do not
become a risk to people and domestic animals.
The device has not been designed to support sa-
fety disconnection. The load is not isolated from
the mains. Voltage-free only when the plug is
pulled out!
30
Using the device for any purpose other than that
described in this operating manual does not fall
within the scope of intended use and shall invali-
date any warranty or liability. This also applies to
any conversion or modification work. The device is
intended for private use only.
Do not connect multiple pluggable switches
into one another.
If you use the device in a security application it
has to be operated in connection with an UPS
(uninterruptible power supply) in order to bridge
possible power failure according to EN 50130-4.
Devices with electronic power supply units (e.g.
TV or high voltage LED light sources) are no ohm-
ic loads. They can generate inrush currents with
more than 100 A. Switching such kind of loads
may lead to premature wear of the actuator.
The device may only be operated within residen-
tial buildings.
Hazard information
31
Advertenties
Hoofdstukken
Inhoudsopgave
