Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Chapter 5
5.1 Opening the perimeter
extraction panel
Before you can take out the filters, you
must open the perimeter extraction
panel(s).After that you can take out the
grease filters.
The panel can be pulled loose on the front
side. Place you fingers behind the panel
and push it down with your thumbs on the
out most flange or edge. Attention!
Because of the applied lock, the panel will
only open after using a substantial
pressure.
EN 10 Maintenance
All manuals and user guides at all-guides.com
5.2.1 Taking out the filters
magnetic filter
The grease filters may only be removed,
after the extractor has been switched off
completely for at least 2 minutes, because
of the running out of the motor.
The filter can be tilted out of the extractor
with the handle bar. Prevent the filter from
falling and causing damages.
If the grease filter with magnetic tape is
equipped with an optional charcoal filter,
the combination is locked with a
removable safety chain.
The filters may be equipped with an extra
air guiding steel plate for a more efficient
extraction. For a proper functioning of the
extractor, these plates have to be replaced
in the same position.
Cleaning the filters; see Chapter 5.3
Cleaning the filters. Clean the contact
surface of the magnetic tape before
replacing the filters.
Fit the safety chains.
filters.
and r
eplace the
Advertenties
Hoofdstukken
Inhoudsopgave
