Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7 LIST OF ALARMS
1
THE FOLLOWING OPERATIONS SHOULD BE PERFORMED EXCLUSIVELY BY QUALIFIED AND
AUTHORISED PERSONNEL.
I
IN CASE OF INCORRECT OPERATION, IT IS RECOMMENDED TO DISCONNECT THE MACHINE
FROM THE ELECTRICAL AND HYDRAULIC SUPPLY NETWORK.
The illuminated button has a combination of white and red colours, which indicate the operating or alarm status,
which are summarised below:
(AL01) Alarm: cold cycle too long
(AL02) Alarm: cold cycles duration difference
(AL03) Alarm: no water (if sensor present)
(AL04) Alarm: ice bin probe faulty
(AL05) Routine maintenance request
(AL06) High temperature at condenser outlet
(AL07) Condenser probe alarm
(AL08) Evaporator probe (if present)
(AL09) Blackout - No power supply
(AL10) High pressure alarm
(AL11) Discharge pump alarm
(AL14) Condenser cleaning
(AL15) Probe reversal
(AL15) Probe reversal
(AL17) Evaporator High T.
Download HACCP data and update SW
Machine start-up phase
Ice production phase
Full bin
Standby
Ozone cycle phase
Gas filling phase (service)
OFF : LED / colour always OFF
ON : LED / colour always ON
flashing : LED / colour ON for 0.5s, OFF for 0.5s
•
Signal / Alarm
EN
71504165-0-005
RED
1 x 0.5"
2 x 0.5"
1 x 3.0"
3 x 0.5"
ON 3"
ON
4 x 0.5"
5 x 0.5"
OFF x 1.0"
ON
1 x 0.5"
7 x 0.5"
5 x 0.5"
5 x 0.5"
1 x 3.0"
3 flash
OFF
OFF
OFF
OFF
OFF
ON 1"
pag. 13
WHITE
1 x 3.0"
1 x 3.0"
1 x 0.5"
1 x 3.0"
ON 3"
OFF
1 x 3.0"
1 x 3.0"
1 x 5.0"
OFF
1 x 0.5"
1 x 3.0"
2 x 0.5"
2 x 0.5"
2 x 0.5"
3 flash
2Hz flash
ON
10s flash
30s flash
ON 1"
ON 1"
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
