Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5.
Use
CAUTION
Always check the temperature before you place your hands in the water stream. Risk of
burning your hands due to hot water.
5.4
*Dispensing liquids
Dispensing soap
•
Activate sector 3. The sector shows a
pulsating green light.
•
Hold your hand under outlet 4.
*Only available for models with integrated dispenser
5.5
Use the remote control with miscea LIGHT systems
With the remote control, you can change the default settings of the system. Basic settings include, but
are not limited to the following: dosage, spool cycle, light pulse and resetting. There are also a number of
special functionalities and settings which have to be enabled with the remote control in order to use with
certain miscea accessories, such as:
•
hand washing timer
•
standby mode
•
public-user mode
For further information and instructions, please visit the download page on our website or contact your
miscea representative. The remote control works through the IR sensors of sector (3). Position the
remote control over the IR ring as shown in fig. I and J below. Then the desired settings can be changed.
For instructions on how to change specific settings using the remote control, please refer to the miscea
Remote Control instruction manual.
Fig. I
•
•
•
miscea
22
automatic water stagnation flush at power on
end point filter mode
in line flow heater mode
Fig. J
3
4
Advertenties
Hoofdstukken
Inhoudsopgave
