Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
Before using the oven for the first time
Remove packaging, clean the interior of
the oven and the hob.
Take out and wash the oven fittings with
warm water and a little washing–up liq-
uid.
Switch on the ventillation in the room or
open a window.
Heat the oven (to a temperature of 250°C,
for approx. 30 min.), remove any stains
and wash carefully; the heating zones
of the hob should be heated for around
4 min. without a pan.
The oven is equipped with a retractable
knobs. In order to select a function do the
following:
1. Gently press and release a knob which
will pop out,
2. Turn the oven functions selection knob to
the desired function.
Symbols printed around the knob indicate
available oven functions.
1
2
Important!
In ovens equipped with the electronic
programmer, the time "0.00" will start
flashing in the display field upon con-
nection to the power supply.
The programmer should be set with
the current time. (See Electronic
programmer ). If the current time
is not set operation of the oven is
impossible.
The electronic prgrammer is equipped
with electronic sensors wich are
switched on by touching or pressing the
sensor surface for at least one second.
Each sensor reaction is confirmed by
the beep.Keep the sensor surface clean
at all times.
Important!
To clean the oven, only use a cloth
well rang out with warm water to
which a little washing-up liquid has
been added.
18
Advertenties
Hoofdstukken
Inhoudsopgave
