Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
- Choose the temperature by pressing the -/+ temperature
button. The respective indication light (green, blue, etc.)
lights up.
- Press the On/Off button to switch the appliance back on.
The adjustable water temperature ranges from 50° - 100°.
Note: The boiling temperature can vary between + 3 °C.
7. Lift the kettle (1) off the base (8). The water is now ready
for use.
You can stop the boiling process any time by pushing the
On/Off button on the key panel (7).
Water left over from a previous boiling cycle can be re-used
in the next boiling cycle. However, always make sure that the
water level is not too low.
Always unplug the appliance after use.
Recommendation: if you are not using he appliance
disconnect it from the mains!
Dry-boil cut-out
Your kettle is equipped with a boil-dry cut-out, which will
switch off the kettle automatically, should it accidentally be
operated without water or by not observing the minimum
water level. In the event of such a safety cut-out, switch off
the appliance immediately, unplug it and let it cool down for
approx. 10 minutes. Afterwards, your kettle is ready for use
again.
Instruction Manual
ENGLISH
21
Advertenties
Inhoudsopgave
