Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
FITTING THE MAIN LINE PREFILTER IN LINE
WITH THE MICRO MIST FILTER
FIGURE 4.3
To fit the Main Line Prefilter onto the Micro
Mist Filter, thread the 1/2" Hex Connector
04-952 into the Main Line Prefilter then
thread it into the Micro Mist Filter inlet
and tighten, ensure both units positioned
straight.
SUPER HIGH FLOW REGULATOR ASSEMBLY
FIGURE 4.5
Thread the 04-915 Pressure Gauge and
04-966 1"NPT Connector into the 04-962
Super High Flow Regulator and tighten.
FITTING THE AUTO DRAIN UNIT
FIGURE 4.4
To fit the Auto Drain Unit, screw the unit
onto the elbow connector on the draining
valve. Make sure the unit is straight down
so it will drain properly.
FIGURE 4.6
Now thread the complete Regulator into the
INLET port on the body of the Radex
Unit and tighten or connect it to the inlet of
the Micro Mist Filter or the Main Line Prefilter.
Filter
®
15
Advertenties
Inhoudsopgave
